 |
Plain - No indicator. For direct visual inspection
of liquid. Mounts in any direction.
Model
Body Material
020
Carbon Steel
130 Bronze
170 316 Stainless
180 Iron
For Higher
Pressure Models add HP to Model Number. Example:
020HP |
 |
Rotator - Paddlewheel indicator used for clear
media to enhance flow indication. Any direction.
Model
Body Material
021
Carbon Steel
131 Bronze
171 316 Stainless
181 Iron
For Higher Pressure Models add HP to
Model Number. Example: 021HP |
 |
Mid-Flapper - Mid-flapper to indicate flow in
either direction. Not for vertical flows down.
Model
Body Material
022
Carbon Steel
132 Bronze
172 316 Stainless
182 Iron
For Higher
Pressure Models add HP to Model Number. Example:
022HP |
 |
Drip Tube- Designed for very low flows so fluid
drips off tube insert. Mainly vertical mounts.
Model
Body Material
023
Carbon Steel
133 Bronze
173 316 Stainless
183 Iron
For Higher Pressure Models add HP to Model Number.
Example: 023 HP
|
|
|
Features
•
Sizes 1/4" to 2" NPT
• Bolt-On Body Design
• Radial Sealing
• Socketweld Available
• Shields Available
Ratings*
• Medium
Pressure Rated
200
psi @ 150°F
150 psi @ 225°F
• Higher Pressure Rated (HP)
400 psi @ 150°F
200 psi @ 350°F
Materials
(Wetted)
• Medium
Pressure Rated
Glass:
Temp Soda Lime
Seals: Neoprene
Viton®*
in 316SS
Rotator/Flapper: Delrin®*
Bridge/Pin: 316SS
• Higher
Pressure Rated (HP)
Glass:
Temp Borosilicate
Seals: Viton®*
Rotator/Flapper: Ryton
Bridge/Pin: 316SS
*Temperature
ratings are dependent on Seal material.
Drip Tube material may be either 316SS
or
Teflon.
Note:
Not applicable for steam service. See page 4
and 5.
|
