 |
Part Number P317 113435-1
This module provides an unscaled, amplified, digital
signal from the turbine housing. This module's digital
output eliminates the need for additional signal
conditioning equipment. This module would replace
the local digital display. |
|
Features
•
Open Collector or 6-volt
Square Wave Output
• Signal up to 5000 ft.
|
 |
Part Number P317 113275-1
This
module allows remote mounting of the computer electronics
for specialized situations such as remote readings
or high and low fluid temperature applications while
maintaining the FM Approval and self powered design.
This module replaces the local digital display.
Increases rating to 250°F. |
|
•
Low Level Sine
Wave Output
• LCD can be located up to
100 ft. away from Turbine |
 |
Part
Number P317 113265-1
This
module allows remote mounting of the computer electronics
for specialized situations such as remote readings
or high and low fluid temperature applications.
This module replaces the local digital display.
For the 2" Aluminum Turbine only the Part Number
is P317 113265-2. |
|
•
Low Level Sine
Wave Output
• LCD can be located up to
300 ft. away from Turbine
|
 |
Part
Number P319 125100-1
This
module provides two industry standard analog signals
by converting the digital output of the on-board
computer readout to an analog signal which is proportional
to flow. This module is for the Stainless Steel
models only and mounts to the back of the turbine
housing. Maximum operating temperature is 150°F. |
|
•4-20mA
or 0-5 Volt Analog
Signal Output
• Weatherproof Enclosure
• 7-30VDC Loop Powered
|
 |
Part
Number P319 125060-1
This
module provides an unscaled, digital signal from
the flow meter by accessing circuitry from the on-board
computer readout. This module is for Stainless Steel
models only and mounts to the back of the turbine
housing. |
|
•
Digital Open Collector
Output
• Signal up to 5000 ft. |
|
|
Part
Number P319 125070-1
This module provides an external power option for
the Pulse Access Module. Internal batteries can
be used as an auxiliary power source. This module
is for Stainless Steel models only and mounts to
the back of the turbine housing. It must be purchased
along with the Pulse Access Module. |
|
•
9-30 Volt External Power
• Installs on Pulse Access
Module Plate |
