 |
Plain - No indicator. For
direct visual inspection of liquid. Mounts in any
direction.
Model
Body Material
050
Carbon Steel
270 316 Stainless
280 Iron (3"
and 4" only)
For
Higher Pressure Models add HP to Model Number. Example:
050HP |
 |
Rotator - Paddlewheel indicator
used for clear media to enhance flow indication.
Any direction.
Model
Body Material
051
Carbon Steel
271 316 Stainless
281 Iron (3"
and 4" only)
For
Higher Pressure Models add HP to Model Number. Example:
051HP Maximum unit size for Rotator is 4".
|
 |
Mid-Flapper - Mid-flapper
to indicate flow in either direction. Not for vertical
flows down.
Model
Body Material
052
Carbon Steel
272 316 Stainless
282 Iron (3"
and 4" only)
For
Higher Pressure Models add HP to Model Number. Example:
052HP |
 |
Drip Tube- Designed for very
low flows so fluid drips off tube insert.
Mainly vertical mounts.
Model
Body Material
053
Carbon Steel
273 316 Stainless
283 Iron (3"
and 4" only)
For
High Pressure Models add HP to Model Number. Example:
053HP |
|
|
Features
•
Sizes 3/4" to 12" Flanged
• Bolt-On Body Design
• Radial Sealing
• Multiple Lengths on some sizes
Ratings*
• Medium
Pressure Rated
3/4"-4":
200 psi @ 150°F
150
psi @ 225°F
6"-12": 150
psi @ 150°F
• Higher Pressure Rated (HP)
All Sizes: 275 psi @ 100°F
205
psi @ 350°F
Materials
(Wetted)
• Medium
Pressure Rated
Glass:
Temp Soda Lime1
Seals: Neoprene
Viton®*
in 316SS
Rotator/Flapper: Delrin®*
Bridge/Pin: 316SS
• Higher
Pressure Rated (HP)
Glass:
Tempered Boro
Seals: Neoprene
Viton®*
in 316SS
Rotator/Flapper: Ryton
Bridge/Pin: 316SS
1Annealed Boro for 3"
and 4"
*Temperature ratings are dependent on Seal material.
Note:
Not applicable for steam service. See page
6.
|
